29
6 Unpacking and Inspection
6.1 Unpacking
• The inverter undergoes 100% testing and inspection before shipping from
the manufacturing facility. However, transport damage may still occur. Before
unpacking the inverter, please check the outer packing materials for damage,
such as holes and cracks.
• Unpacking the inverter according to the following figure.
Figure 6-1 Unpacking the inverter
• Be careful when dealing with all package materials which may be reused for
storage and relocation of the inverter in the future.
• Upon opening the package, check whether the appearance of the inverter is
damaged or lack of accessories. If any damage is found or any parts are missing,
contact your dealer immediately.
To Next Page
Loading...
Need help?
General
