SolaX Power X3-ULTRA Series - Page 162

154
Appendix
====CT/MeterSetting====
>Select
CT
====CT/MeterSetting====
>Select
Enable
====CT/MeterSetting====
>CT Type
100A
c. Set the the address and direction of Meter 2: And Enable the External INV. You
can check the connection status in Meter/CT Check.
====CT/MeterSetting====
>Meter 2 Addr
1
====CT/MeterSetting====
>Meter 2 Direction
Positive
====CT/MeterSetting====
>External INV
Enable
d. After connection succeeded, check the feed-in power of Meter 1 in the path of
Menu>System Status>Meter/CT and check the output power (Output Today and
Output Total) of Meter 2 in the path of Menu>History Data>E_USERDEF.