90
Operation on LCD
9.8 Setting
Settings includes User Settings and Advanced Settings.
9.8.1 User Setting
Setting path: Menu>Setting ("0 0 0 0 ")>User Setting
NOTICE!
The default password for User Setting is "0 0 0 0".
Setting Date & Time
You can set the current date and time of the installation site.
The display format is "2023-06-16 14:00", in which the first four numbers represent the
year (e.g. 2000~2099); the fifth and sixth numbers represent the month (e.g. 01~12); the
seventh and the eighth numbers represent the date (e.g. 01~31). The remaining numbers
represent the time.
=====User Setting=====
>Date & Time
Language
=====Date & Time=====
>2023-06-16
14:00
Setting Language
This inverter provides multiple languages for customers to choose, such as English,
Deutsch, francais, Polskie, Espanol, Português. The default language is English.
=====User Setting=====
Date & Time
>Language
EPS Mute
======Language======
>Select:
English
Setting EPS Mute
When the inverter is running in EPS Mode, you can choose whether the buzzer is turned
on or not .
• Select Yes, the buzzer mutes. This function is turned off by default.
• Select NO, the buzzer will sound once every 4 seconds if the battery SOC is > EPS
min. SOC. When the battery SOC is equal to EPS min SOC, the buzzer will sound
with higher frequency at every 400 ms. And turn off the sound when the battery
SOC is < EPS min SOC.
To Next Page
Loading...
Need help?
General
