130
Decommissioning
Step 11: Unscrew the grouding screw by crosshead screw and remove the grounding
cable.
Step 12: Unlock the anti-theft lock if you installed it. Unscrew the M5 screw on the sides
of inverter and vertically lift up the inverter to dismantle the inverter.
Figure 12-6 Unscrewing the M5 screws
Step 13: Unscrew the screws for fastening the Bracket and remove the Bracket.
12.2 Packing the Inverter
• Load the inverter into the original packing material if possible.
Figure 12-7 Packing the inverter
• If the original packing material is not available, use the packing material which
meets the following requirements:
»
Suitable for the weight of product
»
Easy to carry
»
Be capable of being closed completely
12.3 Disposing of the Inverter
Please dispose of the inverters or accessories in accordance with the electronic waste
disposal regulations applicable at the installation site.
To Next Page
Loading...
Need help?
General
