SolaX Power X3-ULTRA Series - Tools Requirement

28
Preparation before Installation
4.2 Tools Requirement
Installation tools include but are not limited to the following recommended ones. If
necessary, use other auxiliary tools on site.
Hammer drill
Marker
Multimeter
Cross screwdriver
Measuring tape
Flat-head
screwdriver
Utility knife
Wire stripper Crimping tool for RJ45
Crimping tool for
PV terminals
Diagonal pliers
Rubber mallet
Safety gloves
Torque wrench
Safety boots
Heat gun
Safety goggles
Crimping tool
Spirit level
Anti-dust mask
Φ
6 mm Hear shrink tubing
Crimping tool for ferrules Wire cutter
2 mm Flat-head
screwdriver