JEA USER MANUAL
sollateksupport@sollatek.com I 29
7.3 DESKTOP INTERFACE SOFTWARE
The JEA Interface software provides easy creation, checking and saving of parameters.
7.3.1 INSTALLATION AND LOGIN
From the link provided by Sollatek, select all files, and click download. Click Open to open the folder location of the
downloaded files.
Run the setup file. Follow any security prompts to allow installation. A security message will pop up, click Install to continue the
installation.
The installer wizard window will appear on the screen. The program executable files and data will be automatically extracted
without any user intervention. Progress will be indicated on the status bar within the wizard.
Once the JEA Interface has been installed on your computer, the program will open on the login tab. Enter your login
credentials provided by Sollatek and click the login button.
7.3.2 INTERFACE NAVIGATION
1
Parameter category
Parameters are divided into relevant categories to make parameter finding quick
and easy
2
Parameter List with
Display Code
All editable parameters are listed alongside the three-digit display code which
appears on the display
3
Parameter Value Options Drop down menu with all acceptable values for the parameter item
4
Upload to JEA Save the current parameters in the configuration software in the JEA
5
Load Settings from File Open an existing settings file into the software
6
Download from JEA Download the current JEA settings into the software
7
Clear Logged Data Clear logged event data saved in the JEA
8
Close Close the software interface. Any unsaved changes will be discarded
9
Save Settings To file Save the current values in the configuration software as a settings file on the PC
10
Disconnect
Safely disconnect the JEA from the PC. Once discounted the JEA can be
unplugged from the computer
To Next Page
Loading...
Need help?
General
