8
Getting started
Charge the battery
The battery delivered with your
mobile phone is not fully charged. We
recommend that you charge your
mobile for three hours before you use
your mobile phone for the first time.
1. Insert the charger plug into a
220V AC power outlet.
2. Align the charger connector with
the USB socket at the bottom of
the phone and insert it.
3. If the battery is being charged
when the phone is switched off,
only the battery icon with the mes-
sage Charging is displayed (as
shown in the adjacent figure).
When the battery has been fully
charged, the message Completed is displayed.
4. If the battery is being charged while the phone is
switched on, you will notice that the bars in the battery
charge icon (visible on the home screen) show
movement indicating that the battery is being charged.
After the phone is fully charged the battery bars on the
display stop scrolling. You can safely disconnect the
charger from the phone.
5. After the charging process has begun, the only way to
stop charging is to disconnect the charger. If possible,
use a power jack that is easy to plug and unplug.
Set battery alert
When you set the battery alert, every time the battery
charge is low you hear an alarm.
1. To set the battery alert select Menu > Quick set-
tings > Normal > Personalize > Battery alert >
On or, press Menu key to select the checkbox beside
Battery alert to activate the alert.
2. Select Exit to go to the previous screen or press
to return to the home screen.
For more information on alerts, refer “Personalize your
phone” on page 79.
Your SIM card
Purchase a SIM card from your mobile operator. Your SIM
card stores your phone number and user registration infor-
mation. The SIM card can be used in any GSM phone. Your
phone number and user registration information always
remain the same.
Vibrate mode is automatically disabled when the
charging cable is inserted into the USB socket.
To Next Page
Loading...
Need help?
General
