64
Push-To-Talk
5. If any member takes floor control, Start receiving, Lis-
ten is displayed at the top of the screen.
6. During the session the status of
all the members in the group is
displayed on the screen. The
name of the person speaking is
highlighted in the displayed list
of participants.
7. To add more members to the
group select Add, use the
Menu key to select more mem-
bers and select OK. Add user to
session is displayed at the top of the screen.
8. As the initiator, if you press the button , the
group session closes and all members get discon-
nected from the session.
9. Press the button to end the call.
Make unplanned group calls
Unplanned or ad hoc groups are created on the spur of the
moment and do not have pre-arranged set of members or a
specified group ID.
1. To make an ad hoc group call, press the PTT key, the
list of Contacts appears.
2. Use the Menu key as a toggle key to select or clear
the checkbox against the contacts you want to call.
3. Press the PTT key to initiate the call Ad-hoc PTT invita-
tion. Start sending, Speaking is displayed at the top of
the screen.
4. If you want to add more contacts to the session select
Add and choose the contacts you want to call. Add
user to session is displayed at the top of the screen.
5. Continue to hold the PTT key while you are speaking
and release the key when you finish speaking.
6. Press the button to end the call.
Respond to an invitation
1. When you receive an incoming call, Ad-hoc PTT invita-
tion is displayed at the top of the screen. Select
Accept to respond to the call or Reject to decline the
call.
2. If you are in a group session, the status of all the
members in the session is displayed.
3. To continue speaking, press the PTT key and speak
after the beep. The key should be continuously
pressed when you are speaking. Release the PTT key
when you finish speaking.
4. If both parties are in the session but not speaking,
Push to Talk, Idle is displayed at the top of the screen.
5. If the other person ends the call, No active user(s) in
the session is displayed.
6. If you end the call, PTT session ended is displayed.
Add more members to the
session
You can invite more members from the contact list during a
PTT session.