Sonim XP1 User Manual

29
Make calls
Any key answer
When enabled, you can press any key except to
answer a call.
1. To activate this feature, select Menu > Settings >
Call settings > Anykey answer > On or press the
Menu key to select the checkbox and activate the fea-
ture.
Forward a call
If you are not available or choose not to answer a call, you
can use this function to forward your incoming calls to a
new number or an existing number in the Phone book list,
provided your network operator supports this service.
1. To access Call forward settings select Menu > Set-
tings > Call settings > Call forward > OK.
The Call forward options are mentioned below:
When Unconditional Call forward is enabled, the icon
is displayed at the top of the screen when the phone is in
standby mode.
Call barring
You can set Call barring facility for outgoing calls, interna-
tional calls, local calls and all incoming or roaming incoming
calls.
1. To set Call barring settings select Menu > Settings
Call settings > OK > Call barring > OK.
2. Enter a restriction password. (Your network operator
provides this before you use this function). This pass-
word will be sent to the network for verification.
 Cancel barring: when you cancel the call barring
facility you are prompted to enter a restriction pass-
word again. If the password is correct, your phone will
contact the network to disable this function.
Call Forward option Function
Unconditional Forward all incoming calls to
a pre-designated number.
If busy Forward calls when your
phone is busy.
If no reply Forward calls when you do
not answer the incoming
calls.
If unreachable Forward calls when you
have switched off your
phone or when you are out
of coverage call.
Cancel Withdraw the Call forward
option.
Status Check the current Call for-
ward status.
Call Forward option Function

Sonim XP1 Specifications

General

Brand	Sonim
Model	XP1
Category	Cell Phone
Language	English