73
Tools
Delete Pairing
1. Select Menu > Tools > Bluetooth > All device.
2. Select the paired device to be deleted.
3. Select Options > Delete.
Send Data
You can connect several Bluetooth devices at a time. If you
are connected to a headset, you can also transfer the files
to another compatible device at the same time.
1. Select Menu> My files.
2. To send an audio file, Select Sounds > Own Melo-
dies.
3. To send an image, Select Pictures > Own Pictures.
4. Select the file you want to send.
5. Select Option > Send by Bluetooth.
6. Select the paired device to which you want to send the
file.
7. When the other device accepts your file, the message
Object sent is displayed on the screen.
8. When the other device rejects the file, the message
connection failed is displayed on the screen.
Receive data
To receive data using Bluetooth, your device should be
Bluetooth activated and must be visible to other devices.
For more information, refer “Activate Bluetooth” on page 71
and refer Hide/Visible in the section “Bluetooth Settings” on
page 72.
If you cancel the pairing with a device that is
connected, pairing is removed and the connec-
tion is switched off immediately.
All device screen normally displays the
paired devices as well as devices devices
which are not paired currently. Re-pairing
may be required. To send a data to an
unpaired device, Select Scan more...>
select the unpaired device of your choice.
Enter the pin code when you are asked to
enter. For more information refer “Pair
devices” on page 72.
XP1(bt) supports audio formats such as
.mid/.amr/.wav/.mp3/.aac and image for-
mats such as .jgp/.bmp/.wbmp.
To Next Page
Loading...
Need help?
General
