Sonim XP1 User Manual

48
Push-To-Talk
2. Scroll to the contact you want to call. Press and hold
the PTT key until the top of the screen displays Start
sending, Speaking. Continue to hold the PTT key while
you are speaking.
3. Release the PTT key when you finish speaking.
4. When the other person begins speaking, the top of the
screen displays Start receiving, Listen.
5. If you attempt to take the floor while the other person
is speaking, Remote speaking is briefly displayed at the
top of the screen.
6. To end a PTT session, press button. PTT ses-
sion ended is displayed on the screen.
7. If the other participant disconnects the session, the No
active user(s) in the session is displayed.
8. If the other participant ends an incoming PTT call,
User(s) not available is displayed.
Move a call to the background
You can work on other functions on your device, for exam-
ple, send an SMS or use the Phone book while you are on a
PTT call. For more information refer section “Place a call in
the background” on page 65.
Dial in a PTT call
You can make a PTT call by directly dialing the number of a
contact. This facility is made available only if offered by your
service provider. In such a case, a Tel URI (Uniform
Resource Indicator) is given to you by your service provider.
1. Enter the contact number using the international for-
mat (for example, +1234567890) and press the PTT
key. When the number is being dialed, Ringing is dis-
played at the top of the phone. If the recipient's con-
tact number is not registered with your service
provider the message User(s) not available is displayed
on the screen.
2. After the recipient accepts the call, Ad-hoc PTT invita-
tion, Start sending, Speaking is displayed at the top of
the screen. Wait for the beep, press the PTT key and
begin talking. Continue to hold the PTT key while you
are speaking.
3. Release the PTT key when you finish speaking.
4. When the other person begins speaking, Start receiv-
ing, Listen is displayed at the top of the screen.
5. To end a PTT call, press button. PTT session
ended is displayed on the screen.
Make an unplanned group call
An unplanned or and ad hoc group call is made to contacts
who are selected at random from the Contacts list.
1. Press and release the PTT key to display the list of PTT
contacts.
2. Use the Menu key as a toggle key to select or clear
the checkbox against each contact you want to call.
3. Press and hold the PTT key, Ringing is displayed on the
screen.
4. When any participant accepts your call the top of the
screen displays Start sending, Speaking.

Sonim XP1 Specifications

General

Brand	Sonim
Model	XP1
Category	Cell Phone
Language	English