72
Tools
Bluetooth Settings
The following table describes the settings available for Blue-
tooth.
Pair devices
1. Select Menu > Tools > Bluetooth > All devices.
2. Select Scan more...to view the list of devices within a
range of 10 metres with Bluetooth connectivity.
3. Select the device of your choice.
4. Select OK.
5. Enter the pin code ‘0000’ in the Enter pin code
screen. The same Pin code must be entered to the
other device.
6. Select OK.
7. When the other device accepts your request the mes-
sage Pairing done is displayed on the screen.
8. When the other device rejects your request the mes-
sage Pairing failed is displayed on the screen.
Connect a Bluetooth Headset
You can connect a bluetooth headset after pairing it with
your device.
1. Select Menu > Tools > Bluetooth > All device.
2. Select the paired Bluetooth headset.
3. Select Option > Connect.
Rename Paired device
1. Select Menu > Tools > Bluetooth > All device.
2. Select Option > Rename.
3. Enter a new name in the field.
4. Select OK.
Type Function
Change name Select this option to change the
name of your device.
Hide/Visible Use this as a toggle option to select
Hide or Visible. Select Visible to
show your presence to other devices.
Select Hide to hide your presence
from other devices.
Services pro-
vided
Select this option to view the serv-
ices provided for this device.
Keep the Bluetooth connectivity in deactivate
mode if you are not using it.
Do not pair with an unknown device for
security reasons.
To Next Page
Loading...
Need help?
General
