13
YOUR SONIM XP10
Connect to the available WI-FI network to download
the apps or copy data.
4. Tap on Set up as new and Connect to Wi-Fi
screen is displayed. The device will start checking
for updates.
5. Connect to a network to quickly set up your phone.
If you are not connected to the network, you will not
have the ability to:
• Sign in to your Google account
• Restore apps & data
• Get software updates
• Automatically set up time and date
Tap on Continue to proceed.
6. You can use different Google services. Tap on More
to know about the services.
7. By tapping on Accept you agree to the Google
Terms of Services.
8. If you want to add another email account or wish to
set up other services, you can also do it using
Settings. Tap on No, thanks to proceed further.
9. For added security, set up a screen lock. Choose
from the following combinations:
• Fingerprint + Pattern
• Fingerprint + PIN
• Fingerprint + Password
10. Follow the screen instructions to set up your backup
screen lock method (PIN, Pattern, or Password).
11. Set up your ngerprint. Locate the ngerprint sensor
at the front of the phone, place your nger on the
sensor, and lift the nger after you feel a vibration.
Tap on Do it later to perform this task later.
12. Now the ngerprint is added. You can use you
ngerprint to unlock your phone or to approve
any purchases. Tap on Next to proceed further.
Your ngerprint may be less secure than a
strong pattern or PIN.
Important note: When you reboot device,
the ngerprint and face unlock will not work.
You must use PIN or password to unlock
the device for the rst unlock. After the rst
unlock, the ngerprint or face unlock will
function as expected.
You can add another ngerprint by tapping on Add
another.
You can add multiple ngerprints if the same
device is used by multiple users.
To Next Page
Loading...
Need help?
General
