19
CONNECTED DEVICES
If your Bluetooth device being paired supports Sonim
BLE, you will need to follow these steps to complete the
BLE process:
1. Refer to Bluetooth section to pair your device
2. Open Sonim Scout, then Utilities then Sonim BLE
Connect
3. Ensure the device you want to pair with BLE is
powered on and in pairing mode. The Sonim BLE
app will search for available devices. If your device
is not listed then you will be given an option to
connect manually through the Sonim BLE Connect
application.
4. The Sonim BLE Connect app will then show
connected status of those devices paired.
FORGET A BLUETOOTH DEVICE
1. On Bluetooth screen, tap Settings
next to the
device you wish to forget.
2. Tap FORGET > FORGET DEVICE.
3. The device will be unpaired from your phone. To
reconnect with the device, you will need to pair again.
SEND INFORMATION VIA BLUETOOTH
You can use Bluetooth to transfer les between your
phone and another Bluetooth-enabled device, such as
a phone or computer. Send photos, videos, calendar
events, contacts, and more.
RECEIVE FILES
When another device attempts to send a le to your
phone via Bluetooth, you will see a request to accept the
le. Tap ACCEPT to receive the le.
To view the les you’ve received via Bluetooth, on
the Connected devices screen, tap Connection
preferences > Files received via Bluetooth.
USB
USB is a plug-and-play interface that allows a computer
to communicate with peripheral and other devices.
On Connected devices screen,
tap USB. You can use
USB for the following tasks:
• File Transfer: Tap this option to transfer the data
from one device to another device.
• USB tethering: Select to set the USB tethering mode.
• PTP: Tap this option to transfer photos.
• No data transfer: Select to set No data transfer
mode. This will ONLY appear when connecting your
device via USB cord to a laptop or computer.
When you connect the XP10 phone to the PC, it
is shown as a drive and not as a device.
NFC
NFC (Near-Field Communication) is a set of
communication protocols that enable two electronic
devices one of which is usually a portable device such as
a smart phone, to establish communication by bringing
them within 4 cm of each other. NFC is by default
turned ON on your AT&T XP10.
On Connected devices screen, tap Connection
preferences > NFC and will make Contactless payments
options available. Tap Contactless payments and set up
your payment method & your default option.
CAST
1. On Connected devices screen,
tap Connection
preferences > Cast.
2. You can cast your screen from your Android device.
Connect your Android device to the same Wi-Fi
network as your Chromecast or TV with Chromecast
built-in. In the top left corner of the app’s Home
screen, tap Menu Cast Screen > Audio Cast
Screen > Audio.
3. Ensure that your Android device and Chromecast are
connected to the same Wi-Fi network.
4. Tap on the top right corner of the screen and check
Enable wireless display to view a list of nearby
devices you can cast to.
To Next Page
Loading...
Need help?
General
