18
NETWORK & INTERNET/CONNECTED DEVICES
USB TETHERING
Using USB tethering, you can share phone’s internet
connection via USB. To enable USB Tethering, connect
the device through USB cable to the PC.
1. On
Hotspot & tethering screen, tap
USB tethering
.
2. Turn On USB tethering.
BLUETOOTH TETHERING
You can share the phone’s internet connection via
Bluetooth. For sharing internet, you have to pair your
Bluetooth with another device.
1. On
Hotspot & tethering screen, tap
Bluetooth
tethering
.
2. Turn On Bluetooth tethering.
3. Pair your Bluetooth device with another.
DATA SAVER
Data usage refers to the amount of data utilized by your
phone during data transfers through the Internet. The
data usage charges are dependent of the wireless plan
provided by your service provider.
To monitor your data usage, adjust your data usage
settings.
1. On Network and Internet screen, tap Data Saver.
2. Turn On Data Saver.
• Unrestricted data: Set apps to be allowed to use
restricted data when Data saver is on.
VPN
1. On Network & Internet screen, t
ap VPN.
2. Tap at the top right corner of the screen to add a
new VPN prole.
3. In Edit VPN prole screen, enter the Name, Type
(select from the drop-down list), and the server
address.
4. Enter Username and password.
5. Select SAVE.
PRIVATE DNS
1. On Network & Internet screen, t
ap Private DNS.
2. Select your Private DNS mode.
CONNECTED DEVICES
From the Home screen, swipe up to access App screen,
and tap Settings ( ) > Connected devices ( ).
BLUETOOTH
If your Bluetooth device being paired supports Sonim
BLE, you will need to follow these steps to complete the
BLE process:
1. Refer to Bluetooth section to pair your device
2. Open Sonim Scout, then Utilities then Sonim
BLE Connect
3. Ensure the device you want to pair with BLE is
powered on and in pairing mode. The Sonim BLE
app will search for available devices. If your device
is not listed then you will be given an option to
connect manually through the Sonim BLE Connect
application.
4. The Sonim BLE Connect app will then show
connected status of those devices paired.
Bluetooth is a short-range communications technology
that allows you to connect wirelessly to a number of
Bluetooth devices, such as headsets and hands-free car
kits, Bluetooth-enabled handhelds, computers, printers,
and wireless phones. The communication range for
Bluetooth is approximately 30 feet.
On Connected devices screen,
tap Connection
preferences > Bluetooth.
PAIR A BLUETOOTH DEVICE
To activate Bluetooth and pair your XP10 device with
other Bluetooth devices:
1. With Android 12, Bluetooth will automatically turn On
when scanning for a new device.
2. Select the desired device from the list. It starts pairing
with the selected device. A conrmation message is
displayed to pair the device. Select PAIR.
To Next Page
Loading...
Need help?
General
