42
Installing Optional Expansion Boards
Chapter 3 Preparations
3
Use the following procedure to remove the panels on the expansion board
installation tray.
1Remove the two screws (+M3) securing the ventilation adjustment panel,
and remove the ventilation adjustment panel.
2Remove the two screws (+M2.6) securing the blank panel where you
want to install an I/O expansion board, and remove the blank panel.
• Do not discard the panels. Retain them for future use. If you remove an I/
O expansion board, you will need to reattach the blank panel. If you
remove all I/O expansion boards, reattach the ventilation adjustment
panel.
• Use the screws that secured the blank panel to secure the I/O expansion
board. For details, see step 5. Keep the screws that secured the ventilation
adjustment panel together with the ventilation adjustment panel.
Notes
To Next Page
Loading...
