12
EN
interface
adaptor
Using a video output or S-video output
When the player has a video output or S-video output, use an
AV cable and S-video cable for the connection.
1 With the LANC cable, connect the LANC connector on the
front of the adaptor to the LANC connector on the player.
2 With the AV cable, connect the video and audio outputs on
the player to the video and audio inputs on the recorder.
3 If there is an S-video output on the player, use an S-video
cable to connect the S-video output on the player to the S-
video input on the recorder. In this case it is not necessary
to connect the video connector of the AV cable.
(On this Video Walkman the video input, audio input and
S-video input are combined with the video output, audio
output and S-video output.)
player
RecorderLANC cable
Controller
Preparations and Connections
AV cable
S-video cable
To Next Page
Loading...
