7
EN
Interface adaptor
1 LANC connector
2 POWER switch
3 CONTROL UNIT
connector
4 Power indicator
5 Interface connector
1 LANC connector
Connect this to the video device used
as player, by a LANC cable.
2 POWER switch
When this switch is in the ON
position, the unit is powered on. (The
Video Walkman must also be powered
on.)
3 CONTROL UNIT connector
Connect this to the supplied controller.
4 Power indicator
This lights when the unit is powered
on.
5 Interface connector
Connect this to the Video Walkman
used as the recorder.
To Next Page
Loading...
Need help?
General
