55
VF Menu List
Chapter 4 Menu Configuration and Detailed Settings
<Base Setting>
Basic settings
Shoot Mode Cine Cine, Custom Cine: This mode is used to adjust and
check the LUT and Color for the VF/
SDI output signals without processing
the main image signal (color grading
is performed in post-production).
Custom: This mode adjusts the main
image signal on-location.
Color Space S-Gamut S-Gamut, S-Gamut3
(S-Log3), S-Gamut3.Cine
(S-Log3), F900
Selects the colors reproducibility. It is
fixed to S-Gamut∗ in F65RAW mode.
S-Gamut: This mode enables recording
with wide color space comparable to
film cameras.
S-Gamut3 (S-Log3): This mode greatly
improves color reproduction by
correcting image distortion with the
same color gamut as S-Gamut. The
Gamma of the Video Setting is fixed
at 4:S-Log3.
S-Gamut3.Cine(S-Log3): This mode
enables recording with a color gamut
generated by converting the color
gamut from S-Gamut3. The Gamma
of the Video Setting is fixed at
4:S-Log3.
F900: This mode enables color
reproduction equivalent to
conventional cameras.
Color Temperature 5500K 3200K, 4300K, 5500K 3200K, 4300K: Tungsten
5500K: Daylight
ND Filter Clear F65RAW mode/HD mode:
Clear, 0.9, 1.2, 1.5, 1.8,
Close, Maintenance
F65RAW-HFR mode:
Clear(HFR),
Maintenance
Clear: No filter is used.
0.9: 1/8 optical transmittance
1.2: 1/16 optical transmittance
1.5: 1/32 optical transmittance
1.8: 1/64 optical transmittance
Close: Filter closed
Maintenance: Maintenance mode, with
no filter deployed.
Exposure Index 800EI (6.0E) 200EI (4.0E), 250EI (4.4E),
320EI (4.7E), 400EI (5.0E),
500EI (5.4E), 640EI (5.7E),
800EI (6.0E), 1000EI (6.4E),
1250EI (6.7E), 1600EI
(7.0E), 2000EI (7.4E),
2500EI (7.7E), 3200EI (8.0E)
Sets the sensitivity as an EI value (Cine
mode only).
<Shutter/FPS>
Shutter settings
Shutter Electronic Electronic, M-Rotary, Off Displays the currently selected shutter.
Degree 180.0 -- Displays the shutter angle (4.2 to 360.0).
(Display only)
Second 1/47.952 -- Displays the aperture time (Display only).
Step 180.0 360.0, 270.0, 180.0, 172.8,
150.0, 144.0, 90.0, 45.0,
22.5, 11.2
Changes the shutter value in step mode.
360.0 and 270.0 are available for
electronic shutter only.
Continuous 180.0 4.2 to 360.0 (Electronic)
11.2 to 180.0 (M. Rotary)
Changes the shutter value in continuous
variable mode.
FPS -- 1 to 120 (Electronic)
8 to 60 (M. Rotary)
Sets the number of frames shot per
second when Select FPS format is
selected.
Page Configuration
item
Default Settings Remarks
To Next Page
Loading...
