64
VF Menu List
Chapter 4 Menu Configuration and Detailed Settings
4-2-4 Config Menu
Page Configuration
item
Default Settings Remarks
<Switch Assign>
ASSIGN button
function
assignment
Assign 1 Mag Off, Mag, Mag Position,
Hi/Lo Key, Fan Mode,
Rec Review, Highlight Clip
Ind., SRMemory Eject
Off: No function is allocated.
Mag: Displays a magnified image in the
viewfinder and on the SDI OUT
connectors.
Each time the button is pressed, the
magnification changes between 2-
times, 4-times, and Off. When the
magnification is 2-times or 4-times,
the ASSIGN button allocated with the
Mag function is lit.
Mag Position: Selects the position of the
image that is magnified by the Mag
function.
Each time the button is pressed, the
position moves from top left to
bottom right. When the display is
magnified, the ASSIGN button
allocated with the Mag Position
function is lit.
Hi/Lo Key: Temporarily changes LUT for
checking the high-luminance
brightness and low-luminance
darkness of the image in the
viewfinder and from the SDI OUT
connectors. The button toggles
between high-luminance check (gain
reduction), low-luminance check
(gain amplification), and normal.
Fan Mode: Switches the fan operating
mode. For details on the fan
operating mode, see “3-3-9 Selecting
the Fan Operating Mode” (page 36).
Rec Review: Plays the video just
recorded.
Highlight Clip Ind.: Indicates the blown-
out areas of the image output on the
SDI OUT2 connector or in the
viewfinder in red.
SRMemory Eject: Closes the file and
unmounts the SRMemory card
inserted in the SR-R4, then unlocks
the lid of the SR-R4.
Bars: Outputs color bars.
Assign 2 Mag Position
Assign 3 Hi/Lo Key
Assign 4 Rec Review Off, Mag, Mag Position,
Hi/Lo Key, Fan Mode,
Rec Review, Highlight Clip
Ind., SRMemory Eject,
Bars