Sony F65 - Page 65

65
VF Menu List
Chapter 4 Menu Configuration and Detailed Settings
<Slate Data>
Slate information
display
Reel* -- 001 to 999 Displays information specified on the
“Slate” page of the F65Remote Look
Plus (excluding Reel, Camera Index,
Shot).
* For Reel, Camera Index, Shot:
Displays information specified on the
SR-R4.
The values for Reel and Camera Index
only can be modified.
Scene -- --
Take -- --
Camera Index* -- A to Z
Cut -- --
Shot* -- --
Project -- --
Production -- --
Director Name -- --
Director of
Photography Name
-- --
Description -- --
Next -- Execute by ENTER. Moves to next page.
Back -- Execute by ENTER. Moves to previous page.
Clear -- Cancel/OK
Execute by ENTER.
Clears the items (excluding Reel,
Camera Index, Shot).
<Fan Mode>
Fan operating
mode select
Fan Mode Auto2 Auto1, Auto2, Min, Max Auto1: Automatic control, according to
the internal temperature.
Auto2: Automatic control, according to
the internal temperature, and
maintains quiet operation when
recording.
Min: Quiet mode, without
synchronization with recording (can
be used at ambient temperatures of
less than 30°C (86°F)).
Max: High-speed mode, fan rotates at
maximum speed.
Mag Mag Type x2/x4 x2/x4, x2, x4 Specifies the magnification level that is
used for the display when you press an
ASSIGN button to which the Mag
function is assigned.
Auto Off Timer On On, Off Enables/disables the function that
returns the magnified display to normal
after 30 seconds.
<Date/Hour
Meter>
Date/Time
settings and
accumulated ON
time display
Date -- mm/dd/yyyy Sets the current date.
Time -- hh:mm Sets the current time.
Date Type M/D/Y M/D/Y, M/D Selects the date display format.
Hour Meter -- 0H to 99999H Displays the accumulated powered-ON
time since reset from the Service menu.
<Genlock Sync>
Sync signal
settings
Input Signal HD-Y HD-Y, HD-SDI Selects the input connector for the
external sync signal. The genlock signal
must be reapplied after modifying this
setting.
HD-Y: HD 3-level sync
HD-SDI: HD-SDI input
Status -- Locked, Not Locked,
No Signal
Display only. Locked: Synchronized
successfully.
Not Locked: Not synchronized.
No Signal: There is no input signal.
Page Configuration
item
Default Settings Remarks