74
Warning/Error Messages
Appendix
Warning/Error Messages
If the battery voltage drops or an error is detected when
power is applied or during operation, the corresponding
indicator lights up/flashes and a message appears on the
subdisplay. The error details are displayed in the self-
diagnostics on settings page 3 on the subdisplay and in the
viewfinder.
Warnings and error messages occurring on the SR-R4 are
also displayed in the self-diagnostics field.
For details about SR-R4 messages, refer to the operation
manual of the SR-R4.
A message prompt is displayed in the viewfinder/monitor
to execute the APR function if the fixed-interval image
sensor auto adjustment (APR) is not executed. If
prompted, execute Automatic Pixel Noise Reduction on
the <Maintenance> page of the Diagnosis menu.
Note that the APR function may not execute if the camera
is too cold or too hot.
In this case, a low temperature or high temperature
indication message is displayed. This does not indicate a
malfunction.
Indicator Subdisplay Self diagnostics
field indication
Meaning
REC: Flashing red 12 V power supply
voltage indicator
flashing
12V Battery (Near
End)
The voltage of the 12 V power supply has fallen to the
Near End value setting.
REC: Flashing red
rapidly
12 V power supply
voltage indicator
flashing rapidly
12V Battery (End) The voltage of the 12 V power supply has fallen to the
End value setting.
REC: Flashing red 24 V power supply
voltage indicator
flashing
24V Battery (Near
End)
The voltage of the 24 V power supply has fallen to the
Near End value setting.
REC: Flashing red
rapidly
24 V power supply
voltage indicator
flashing rapidly
24V Battery (End) The voltage of the 24 V power supply has fallen to the
End value setting.
REC: Flashing when
synced with SR-R4.
Media remaining
indicator flashing
Media Remain (Near
End)
The remaining media on the SR-R4 has reduced to the
Near End value setting.
REC: Flashing when
synced with SR-R4.
Media remaining
indicator flashing
rapidly
Media Remain (End) The remaining media on the SR-R4 has reduced to the
End value setting.
DIAGNOSIS:
Flashing red
Displays same
message as self
diagnostics field in a
dialog.
Temperature Care The internal camera temperature is approaching the
limit.
DIAGNOSIS:
Flashing red rapidly
Displays same
message as self
diagnostics field in a
dialog.
Temperature NG!
Shutdown Camera
The internal camera temperature has reached its limit.
Turn off the camera power supply.
Consult your local Sony representative.
DIAGNOSIS:
Flashing red rapidly
Warning Fan1 NG! Fan 1 near the top panel stopped.
Consult your local Sony representative.
DIAGNOSIS:
Flashing red rapidly
Warning Fan2 NG! Fan 2 near the top panel stopped.
Consult your local Sony representative.
DIAGNOSIS:
Flashing red
Warning Sync Error A sync error occurred.
If the error continues, consult your local Sony
representative.
DIAGNOSIS: Lit red
DOCK: Lit yellow
Warning Optical Level Care The optical level of the Recorder connector has reduced
to caution level.
Clean the Recorder connector or replace the optical
module.
DIAGNOSIS: Lit red
DOCK: Lit red
Warning Optical Level NG A light reception error occurred with the Recorder
connector.
Immediately, clean the Recorder connector or replace
the optical module.
To Next Page
Loading...
