66
VF Menu List
Chapter 4 Menu Configuration and Detailed Settings
4-2-5 File Menu
<Battery Alarm>
Supply voltage
settings
DC IN (24V) Type Type1 Type1, Type2 Selects the 24 V system supply settings.
Near End 22.2 V 20.5 V to 30.0 V Sets the power supply voltage drop
warning level for the 24 V supply.
End 21.6 V 20.0 V to 24.0 V Sets the power supply exhausted
warning level for the 24 V supply.
DC IN (12V) Type Type1 Type1, Type2 Selects the 12 V system supply settings.
Near End 11.1 V 11.0 V to 17.0 V Sets the power supply voltage drop
warning level for the 12 V supply.
End 10.8 V 10.5 V to 14.0 V Sets the power supply exhausted
warning level for the 12 V supply.
Page Configuration
item
Default Settings Remarks
Page Configuration
item
Default Settings Remarks
<Gamma File>
Gamma file
settings
1 Sets the imported F65 gamma file (.gmd
file name extension).
A preset value of 709(800%) gamma is
stored in configuration item 1 as the
default gamma value. A user gamma file
can be imported, overwriting the preset
value. This value is selected when
Gamma File Preset is executed on the
<File Preset> page.
Importing a gamma file stores all gamma
data within the camera and is user-
selectable.
Name 709(800%) (Up to 12 characters), --
Comment Preset entry
2
Name -- (Up to 12 characters), --
Comment --
3
Name -- (Up to 12 characters), --
Comment --
4
Name -- (Up to 12 characters), --
Comment --
5
Name -- (Up to 12 characters), --
Comment --
Import -- Execute by Enter. Imports an F65 gamma file with .gmd file
name extension (up to five) from USB
flash memory or SD memory card.
<1D/3D LUT
File>
1D/3D LUT file
display
Select 1D LUT 1D LUT, 3D LUT Switches between 1D LUT file or 3D
LUT file for the LUT file to be displayed.
Data -- (Up to 12 characters) Displays the data name of the imported
F65 1D LUT file (.ltd file name
extension) or F65 3D LUT file (.cube file
name extension).
File -- Displays the file name of the imported
F65 1D LUT file (.ltd file name
extension) or F65 3D LUT file (.cube file
name extension).
Import Execute by Enter.
Imports an F65 1D LUT file with .ltd file name
extension (up to 100) or an F65 3D LUT file
with .cube file name extension (up to 10).
When you overwrite an imported file, the
information for the same file registered to
the look directory will also be overwritten.
Delete Execute by Enter. Deletes the selected file.
To Next Page
Loading...
