Sony F65 - Page 67

67
VF Menu List
Chapter 4 Menu Configuration and Detailed Settings
<ASC CDL File>
ASC CDL file
display
Data -- (Up to 17 characters) Displays information in the
ColorCorrection id tag of the imported
ASC CDL/CCC file. Displays the file
name instead if there is no
ColorCorrection id tag in the ASC CDL/
CCC file.
File -- Displays the file name of the imported
ASC CDL/CCC file.
Import Execute by Enter. Up to 100 ASC CDL/CCC files can be
imported. When you overwrite an
imported file, the information for the
same file registered to the look directory
will also be overwritten.
Delete Execute by Enter. Deletes the selected file.
<L3D File>
L3D file settings
Data -- (Up to 12 characters) Displays the data name of the imported
F65 L3D file (.l3d file name extension).
File -- (Up to 12 characters) Displays the file name of the imported
F65 L3D file (.l3d file name extension).
Import -- Execute by Enter. Imports up to 10 F65 L3D files (.l3d file
name extension). When you overwrite
an imported file, the information for the
same file registered to the look directory
will also be overwritten.
Delete -- Execute by Enter. Deletes the selected file.
<All File>
Configuration file
import/export
Import -- Execute by Enter. Imports the settings of all menu
parameters (excluding the following)
from a configuration file.
• All Network menu items
• <Date/Hour Meter> in the Config menu
• Gamma File, 1D LUT File, 3D LUT
File, ASC CDL File, and L3D File in
the File menu
Export -- Execute by Enter. Exports the settings of all menu
parameters (excluding the following) to a
configuration file.
• All Network menu items
• <Date/Hour Meter> in the Config menu
• Gamma File, 1D LUT File, 3D LUT
File, ASC CDL File, and L3D File in
the File menu
<File Preset>
Restore settings
to factory default
Gamma File Preset -- Execute by Enter. Deletes all gamma files, and restores the
factory default setting.
1D LUT File Preset -- Execute by Enter. Deletes all 1D LUT files, and restores
the factory default setting.
3D LUT File Preset -- Execute by Enter. Deletes all 3D LUT files, and restores
the factory default setting.
ASC CDL File
Preset
-- Execute by Enter. Deletes all ASC CDL files and restores
the factory default settings.
L3D File Preset -- Execute by Enter. Deletes all L3D files, and restores the
factory default setting.
All File Preset -- Execute by Enter. Restores all settings (excluding the
following) to the factory default values.
• All Network menu items
• <Date/Hour Meter> in the Config
menu
• Gamma File, 1D LUT File, 3D LUT
File, ASC CDL File, and L3D File in
the File menu
Page Configuration
item
Default Settings Remarks