Sony F65 - 4-2-6 Network Menu

68
VF Menu List
Chapter 4 Menu Configuration and Detailed Settings
4-2-6 Network Menu
This menu is not displayed in web browsers or on tablet
devices.
<Media Format>
Formatting
media
M.S./SD Format -- Execute by Enter. Initializes the media and creates folders
for the F65.
SRMemory Format -- Execute by Enter. Initializes the SRMemory.
Page Configuration
item
Default Settings Remarks
Page Configuration
item
Default Settings Remarks
<LAN Setting>
IP address
settings
DHCP Disabled Enabled, Disabled Sets whether to automatically obtain an
IP address from a DHCP server.
IP Address 192.168.1.1 0.0.0.0 to 255.255.255.255 If DHCP is enabled, displays the IP
address obtained from the DHCP server.
Subnet Mask 255.255.255.0 0.0.0.0 to 255.255.255.255
Default Gateway 0.0.0.0 0.0.0.0 to 255.255.255.255
Set -- Execute by Enter.
<Wi-Fi Setting>
Wi-Fi settings
Wi-Fi Disabled Enabled, Disabled Enables/disables the Wi-Fi settings.
Enable for connection.
Wi-Fi Status No connectivity Excellent, Good, Weak,
No connectivity
Displays the communication/connection
status.
SSID (Blank) (Blank), String of up to 32
characters
Displays the network name.
Network Type -- Infra, ad-hoc Displays the network connection mode.
IP Address -- 0.0.0.0 to 255.255.255.255 Displays the value obtained from the
DHCP server.
Subnet Mask -- 0.0.0.0 to 255.255.255.255
Default Gateway -- 0.0.0.0 to 255.255.255.255
Scan Network -- Execute by Enter. Scans the network access point.
Connect Manually -- Execute by Enter. Used to enter the network access point.
ad-hoc Setting -- Execute by Enter. Configures ad-hoc network mode. You
can select whether to use an IP address
that can be automatically detected by
F65Remote Look Plus, for example, or
whether to use an arbitrary IP address.
SSID (Blank) (Blank), String of up to 32
characters
Sets the network name. Displayed only
when Scan Network is executed.
Network Type Infra Infra, ad-hoc Displays the connection mode.
Authentication WPA2PSK Infra:
WPAPSK, WPA2PSK
ad-hoc:
OPEN, SHARED
Sets the network authentication method.
Displayed only when Scan Network is
executed.
Encryption AES Infra:
TKIP, AES
ad-hoc:
WEP
Sets the data encryption method.
Displayed only when Scan Network is
executed.
WEP Key Index 1 1, 2, 3, 4 Selects the WEP key index number
when using ad-hoc mode.