Sony ICD-TX660 - POWER;HOLD Switch

5-025-099-11(1) Copyright 2021 Sony Corporation
POWER・HOLD switch (*3)16.
The
(play/enter/stop) button and VOL + (volume +) button have a tactile dot. Use the tactile dot as a reference when operating the IC
recorder.
*1
The built-in speaker is for checking the recorded sound, so the volume is limited. If playback sound is not loud enough or is difficult to hear, use
headphones (not supplied.)
*2
Sliding the POWER・HOLD switch to [POWER] and holding it for 8 seconds or longer restarts your IC recorder. For details, see Restarting the
IC recorder.
*3
10