Help Guide
IC Recorder
ICD-TX660
The IC recorder does not turn on or pressing any button does not work.
The built-in rechargeable battery in the IC recorder is running out of power. Charge the built-in rechargeable battery.
Your IC recorder is turned off.
Slide the POWER・HOLD switch to [POWER] and hold it until the display window turns on.
Your IC recorder is placed in the HOLD state.
Slide the POWER・HOLD switch to the center dot.
Related Topic
Charging the battery with a computer
Using/Charging the IC recorder with the USB AC adaptor
Turning the power on
Parts and controls
Releasing the IC recorder from the HOLD state
5-025-099-11(1) Copyright 2021 Sony Corporation
To Next Page
Loading...
