Help Guide
IC Recorder
ICD-TX660
Quickly locating your desired portion of a recording (Time Jump)
With the time jump function, you can move the total playback time of each file to 1 of 10 divided positions.
You can quickly locate your desired portion of long recorded files.
Note
In time jump mode, you cannot move to the next or previous file. Press JUMP to enter normal play mode.
You cannot use the Easy Search function, the A-B repeat function or the button-hold repeat playback function while in time jump
mode.
Hint
While playback is on standby or in progress, press JUMP.
The IC recorder enters time jump mode.
The playback bar is divided into 10 positions.
The 10 percent (%) segment where the current playback point belongs is indicated above the left end of the
playback bar.
1
Press either
(review/fast backward) or (cue/fast forward).
(cue/fast forward): The playback position of a file jumps forward in 10% increments in relation to the total
playback time.
(review/fast backward): The playback position of a file jumps back in 10% increments in relation to the total
playback time.
Time jump mode can be used in 1 file.
A: File 1
B: File 2
C: File 3
2
Press JUMP again to resume normal playback.
3
To Next Page
Loading...
