140
• SteadyShot image stabilization may not be able to correct the image if the shaking is too
large, even if [STEADYSHOT] is set to [ACTIVE] or [STANDARD].
Image cannot be recorded or played back properly.
• If you continue recording and deleting images on recording media for a long period of time,
the files on that media may become fragmented. As a result, you may not be able to record
and save images properly.
Back up the image data, then format the media using [MEDIA FORMAT].
Menu items are grayed out or do not work.
• You cannot select grayed out display items in the current recording/playback situation.
• There are some functions you cannot activate simultaneously. The following list shows
examples of unworkable combinations of functions and menu items.
The settings of menu items change.
• When the AUTO/MANUAL switch is set to AUTO, settings related to picture quality
automatically change.
Iris, ISO sensitivity/gain, shutter speed, or white balance cannot be adjusted
manually.
• Set the AUTO/MANUAL switch to MANUAL.
Tiny spots in white, red, blue, or green appear on the LCD screen.
• This phenomenon appears when using a slow shutter speed (p. 44). This is not a malfunction.
The subjects passing by the frame very fast appear crooked.
• This is called focal plane phenomenon. This is not a malfunction. Because of the way that the
image device (CMOS sensor) reads out image signals, the subjects passing by the frame
rapidly might appear crooked depending on the recording conditions.
Horizontal stripes appear on the image.
• This occurs when recording pictures under a fluorescent lamp, sodium lamp, or mercury
lamp. This is not a malfunction. This can be improved by changing the shutter speed (p. 44).
Cannot use
(menu disabled)
Situation
[ON/OFF] of [AE SHIFT]
All of iris, ISO sensitivity/gain, and shutter speed are set
manually.
[ZEBRA], [PEAKING] [COLOR BAR] is set to [ON].
[ON/OFF] of [MARKER] [FOCUS MAGNIFIER] is set to [ON].
[TC PRESET] [TC MAKE] is set to [REGENERATE].
[COLOR BAR]
Movies are being recorded.
[FOCUS MAGNIFIER] is set to [ON].
Troubleshooting (Continued)
To Next Page
Loading...
Need help?
General
