Sony PDW-680 - Page 206

Adjustments and Settings from Menus
206
Chapter 6 Menu Displays and Detailed Settings
a) Even when the MARKER item is set to OFF on
the MARKER page of the USER menu, the
ASSIGN 1/3/4 switches allow you to display or
not to display all markers.
b) This function cannot be assigned to the RET
button on the lens.
c) Even if the RETURN VIDEO item is set to OFF
on the ASSIGNABLE SW page of the
OPERATION menu, you can use this switch to
display the image of the return video signal on
the viewfinder.
d) Only the Assign 3 SEL screen appears.
e) Video momentarily becomes black and audio is
momentarily muted when the digital extender is
switched.
f) This does not appear if nothing is assigned in the
Assign menu.
Functions to be assigned to the ASSIGN 2
(slide-type) switch
COLOR TEMP
SW 3200K
Assigns the function that
switches the white balance to
3200K.
COLOR TEMP
SW 4300K
Assigns the function that
switches the white balance to
4300K.
COLOR TEMP
SW 5600K
Assigns the function that
switches the white balance to
5600K.
COLOR TEMP
SW 6300K
Assigns the function that
switches the white balance to
6300K.
ELECTRICAL
CC
Assigns the function that
switches between electrical
CC filters (3200K/4300K/
5600K/6300K).
CC 5600K Assigns the function that
applies an electrical 5600 K
filter.
SHOT MARK1 Assigns the function that
records a SHOT MARK 1
essence mark.
SHOT MARK2 Assigns the function that
records a SHOT MARK 2
essence mark.
CLIP FLAG
OK
Assign the functions that set
or clear OK, NG, and KEEP
flags during recording or
playback.
CLIP FLAG
NG
CLIP FLAG
KEEP
FOCUS MAG Assigns the function that
magnifies the central part of
the viewfinder picture, for
easier focus adjustment.
(This function does not
affect recorded video or
other signal output.)
DIGITAL
EXTENDER X2
Assigns the function that
electronically magnifies the
central part of the picture (all
video output is magnified,
including recorded video).
e)
DIGITAL
EXTENDER X3
DIGITAL
EXTENDER X4
Function Description
DIGITAL
EXTENDER X2
X3 X4
Assigns the function that
electronically magnifies the
central part of the picture (all
video output is magnified,
including recorded video).As
each switch or button is
pressed, the magnification
changes in the order 2-times
t 3-times t 4-times t
OFF.
CLIP CONT
REC
Assigns the function that
turns the Clip Continuous
Rec function on and off.
UA01 to
UA10
f)
Assigns the items assigned
in the ASSIGN SEL menu.
Function Content
OFF Assigns no function.
FRONT MIC Assigns the function that
switches between stereo and
monaural when a stereo
microphone is connected.
PICTURE
CACHE
Assigns execution of
recording in picture cache
mode.
Function Description