Setting the Recording Format
53
Chapter 3 Adjustments and Settings for Shooting
As you turn the MENU knob, the aspect ratio
changes as follows: 16:9 y 4:3.
Note
The unit ignores this setting when it records video from
external devices (see page 95).
To set the audio recording format (when IMX 50,
IMX 40, or IMX 30 is selected)
Select AU DATA LEN(IMX) on the FORMAT
page or AUDIO-2 page of the MAINTENANCE
menu, and turn the MENU knob to select the
desired audio recording format.
As you turn the MENU knob, the audio recording
format changes as follows: 16bit y 24bit.
As long as the system frequency is the same, clips
in different recording formats can be recorded or
written to the same disc.
1)
In this manual, this is referred to as “mixed format
recording mode”.
1) The recording format is regarded as different
whenever the system frequency, video resolution,
video codec/bit rate, or number of audio channels or
number of bits does not match.
Notes
• Regardless of system frequency matching, it is
not possible to mix clips with different video
resolutions (number of system lines) in the
same clip list.
• When the unit is in a mode that calls for
playback across clips that were recorded in
different recording formats, video and audio
playback may stop at the point where the format
changes from one format into another, and then
start again.
You can record clips with different recording
formats, for example HD422 and HD420SP clips,
by putting this unit into mixed format recording
mode.
To enable mixed format recording mode
Set MIXED RECORDING on the CAM
CONFIG 1 page of the MAINTENANCE menu
to “ENABL”.
If you want to disable mixing of clips with
different recording formats, leave this item set to
“DSABL”. However, regardless of the mixed
format recording mode setting, it is always
possible to mix clips in the following formats.
• HD420 HQ, SP, and LP
Mixed recording of clips in
different formats on the same disc
SYSTEM FREQUENCY: 59.9i
REC FORMAT : IMX 50
ASPECT RATIO(SD): 16:9
AU DATA LEN(IMX): 16bit
COUNTRY : NTSC(J)AREA
024
FORMAT TOP
To Next Page
Loading...
