Advanced Operations for Shooting
96
Chapter 4 Shooting
2) Does not appear when the optional CBK-SC02
Analog Composite Input Board is not installed.
After you complete this setting, you can record
the video signals of external devices by inputting
the SDI signals selected in step 3 to the SDI IN
(OPTION) connector.
Recording analog composite signals
(with the CBK-SC02 installed)
When the optional CBK-SC02 Analog
Composite Input Board is installed in this unit,
you can record analog composite signals input to
the GENLOCK IN connector. When an HD
recording format (MPEG HD422 50, or MPEG
HD420 HQ/SP) is selected, analog composite
signals are upconverted to HD signals before
recording.
Note
Even if the GENLOCK item on the GENLOCK page of
the MAINTENANCE menu is set to OFF, the unit
automatically genlocks to external video signals that are
input to the GENLOCK IN connector. When
GENLOCK is set to OFF, the genlock is cancelled when
the input of external video signals stops and the unit
switches to camera shooting.
1 Display the SOURCE SEL page of the
OPERATION menu.
2 Select REC VIDEO SOURCE, and turn
the MENU knob to display “EXT”.
3 Select EXT VIDEO SOURCE, and turn
the MENU knob to display “VBS”.
1)
1) Does not appear when the optional CBK-SC02
Analog Composite Input Board is not installed.
After you complete this setting, you can record
external video signals by inputting analog
composite signals to the GENLOCK IN
connector.
The Live Logging function allows you to transfer
proxy AV data to a computer as you are shooting,
or to send and receive metadata between this unit
and a computer.
1)
On this unit, you can transfer data via Ethernet or
a wireless LAN.
2)
This function allows you to do the following on
your computer.
• View proxy AV data
• Add and edit metadata (titles, comments,
essence marks, and so on)
• Create clip lists
After adding or editing metadata, or creating a
clip list, you can transfer the metadata or clip list
from the computer back to this unit for recording
on the original disc.
1) The CBKZ-UPG01 Software Upgrade Key must be
installed to use the Live Logging function.
2) To make wireless LAN connections, you must install
the optional CBK-WA01 Wi-Fi adapter and the
CBKZ-UPG01 Software Upgrade Key.
See page 208 for more information about wireless
LAN settings.
There are two Live Logging operating modes:
Live mode and Live View mode. The following
table lists the main functions provided by each
operating mode.
Notes
• The CBKZ-UPG01 Software Upgrade Key must be
installed to use the Live Logging function.
• In Live View mode, it is not possible to set time data
by setting the F-RUN/SET/R-RUN switch to SET. To
set time data, first switch from Live View mode to
another operating mode.
• Regardless of the setting of the F-RUN/SET/R-RUN
switch, time data advances in F-RUN mode while the
unit is operating in Live View mode.
• In Live View mode, it is not possible to set the
PRESET/REGEN/CLOCK switch to REGEN and
record timecode that is continuous with timecode read
from the disc.
Using the Live Logging function
Operating
mode
Main functions as seen from this
unit
Live
• Send clip metadata
• Write edited clip metadata back to
disc
• Receive planning metadata
• Receive clip lists
Live View
• Same functions as above
• Send proxy AV data
To Next Page
Loading...
