Sony PDW-680 - Advanced Operations for Shooting

Advanced Operations for Shooting
79
Chapter 4 Shooting
5 Press the button to which you have
assigned the Freeze Mix function once
more.
The unit exits Freeze Mix mode.
6 Start recording.
Note
If you exchange discs before starting to record, be
careful to keep the unit from moving.
Shot marks and other essence marks can be
recorded on the disc.
Recording essence marks for scenes containing
important images and sounds enables quick
access to the marked points. This increases
editing efficiency.
To record a shot mark using the RET
button on the lens
To make it possible to record shot marks using the
RET button on the lens, carry out the following
procedure.
(How to select an item in the menu screen: Turn
the MENU knob to move b to the desired item.)
1 Display the ESSENCE MARK page of
the MAINTENANCE menu.
For details on menu operations, see “Basic
menu operations” on page 189.
2 Select the essence mark to be recorded,
and press the MENU knob to display
“ON”.
3 Repeat the step 2, as necessary.
To record shot mark 1/2
When the camcorder is in recording or playback
mode, operate the lens RET button as follows.
Shot mark 1: Press the RET button once.
Shot mark 2: Press the RET button twice in rapid
succession.
Advanced Operations for
Shooting
Recording essence marks
?M11 ESSENCE MARK TOP
RET SHOT MARK 1 : ON
RET SHOT MARK 2 : ON
INDEX PIC POS : 0SEC
FIND MODE : R.ST