Sony SA-SD35 - Page 6

HT-S350/SD35
6
Sony CONFIDENTIAL
For Authorized Servicer
MODEL IDENTIFICATION
When identifying the destination and model of this unit, check the
part number, destination code, model name and system name printed
on the model number label on the bottom side of the main unit.
Note: The content printed and the part number suffi x printed on the model
number label may be changed in the midway of production.
– Bottom view –
front side
Model Name
System Name
Part No. Destination
code
Part No.
Desti-
nation
code
Model
Name
System
Name
Destina-
tion
5-000-987-01 (UC2) SA-S350 HT-S350 US, CND
5-000-987-11 (CEL) SA-S350 HT-S350 AEP
5-000-987-21 (CEK) SA-S350 HT-S350 UK
5-002-488-01 (U2) SA-SD35 HT-SD35 US
5-002-488-61 (CEL) SA-SD35 HT-SD35 AEP
5-002-488-71 (CEK) SA-SD35 HT-SD35 UK
DESTINATION ABBREVIATIONS
The following abbreviations for model destinations are used in this
service manual.
• Abbreviations
AEP : European area (Except for UK, Ireland), East European
area, CIS area (Moldova) and Middle East area (Israel, Jor-
dan) models
CND : Canadian and Latin American area (Puerto Rico) models
UK : European area (UK, Ireland) model
RESET METHOD
After the repair of this unit is completed, be sure to reset the bar
speaker by referring to the following before checking the operation.
Reset procedure:
1. Insert the AC power cord of the bar speaker.
Outle
t
2. Touch the [
1
] button to turn the power on.
3. Touch the [
1
] button and [–] button at the same time for about 5
seconds, then all indicators fl ash 3 times (resetting).
Touch for about
5 seconds.
flash 3 times
4. Unplug the AC power cord.
Outle
t
5. Insert the AC power cord, and touch the [
1
] button to turn the
power on.
Outle
t
SYSSET
2019/02/1301:27:25(GMT+09:00)