Soredex CRANEX Novus e - Page 17

Installation and set-up manual 208668 11
CRANEX Novus e 2. Pre-installation requirements
Installation tools
- Electric drill
- Spanners (wrenches) 7, 10, 17 (two) mm AF
- Hexagon socket wrenches (Allen keys) 1.5 - 8
mm
- Slot blade screwdrivers 0.5 x 3 mm, 0.6 x 3.5
- Torx screwdrivers T20, T25, T30
- Spirit level
- Pliers and wire cutters
- Scissors / Knife
- Transportation wheels (Optional)
Calibration and setup tools
- Ball Phantom (To be ordered separately)
- Image quality test tools (Ball and Pin Phantom,
Digital Test Tool and copper fi lter) where use of
this calibration tool is required. (To be ordered
separately)