Installation and set-up manual 208668 39
CRANEX Novus e 3. Installing the unit
3.11 Activating optional imaging programs
1. Order the Optional Bitewing and Sectional
Panoramic program upgrades from Soredex
Customer Service.
When ordering, you need to give the Serial
Number of the unit into which the optional
programs will be activated.
Soredex Customer Service will e-mail an
Option Activation Licence Code to you.
NOTE:
If the Bitewing or Sectional Panoramic
selection key appear on the main screen
without separate activation, it indicates that the
program option in question has already been
activated at the factory and does not need
to be activated through the option activation
again.
2. Switch on the unit and touch the service key
on the main control panel of the unit.
3. Press the Option Activation key.
4. A keypad which allows you to enter the license
code will appear.
Enter the Option Activation Licence Code,
press OK (tick) and the optional program will
be added to the unit.
Press the Back key twice to return to the main
screen.
5. If the activation is successful, a message of
selected option activation is shown and a key
for the activated program will appear visible on
the main screen.
6. Restart the unit to complete the activation
process.
To Next Page
Loading...
