Soredex CRANEX Novus e - Attaching the Covers to the Column

20 Installation and set-up manual 208668
3. Installing the unit CRANEX Novus e
3.5 Attaching the covers to the column
1. Attach the covers to the bottom of the column.
Attach the Front Cover, A, to the front of the
column with the special long screws (4), they
are inserted from the rear. Do not tighten them
yet.
Attach the Side Covers, B, to the sides of the
column. Note that the front edge of the Side
Covers is positioned between the column and
the Front Cover. The rear edge is attached to
the back of the column with two screws.
Tighten all the screws.