Installation and set-up manual 208668 23
CRANEX Novus e 3. Installing the unit
4. If the user wants to use the exposure switch
with the remote exposure switch option,
connect the exposure switch to the appropriate
connector on the remote exposure switch.
Exposures can be taken either with the
exposure switch or with the button on the
remote exposure switch.
5. Attach the exposure switch holder, within the
extension range of exposure switch spiral
cable, to the requested position.
Make sure that when the exposure switch
is used the user can protect them self from
radiation and at the same time see the patient
during an exposure.
To Next Page
Loading...
