Sourcetronic ST600 - Page 23

Frequency Inverter ST600 Series High-Performance Multifunction VFD Product Overview
-16-
Figure 3-9 Structure diagram of SP models (using a 015G3 VFD as an example)
16
13
15
3
12
9
10
14
6
5
7
8
4
3
2
1
No.
Name
Use
1
Upper cover
Protects internal components and parts
2
Keypad
For details, see section 5.4 "Operating the VFD through the
keypad"
3
Lower cover
Protects internal components and parts
4
Expansion card
Optional part. For details, see Appendix A "Expansion cards"
5
Baffle of control board
Protects the control board and install expansion card
6
Cooling fan
For details, see 8 "Maintenance"
7
Keypad interface
Connects the keypad
8
Nameplate
For details, see 3 "Product Overview"
9
Main circuit terminal
For details, see 4 "Installation Guide"
10
Control terminals
For details, see 4 "Installation Guide"
11
Waterproof connector
Locks and secures connection cables
12
POWER indicator
Power indicator
13
Label of ST600 series
product
For details, see section 0 "Note: This is an example of the
nameplate of standard frequency inverter ST600 products. The
UKCA/CE/IP20/IP55 markings on the top right will be marked
according to actual product model and certification conditions.
Product model" of this chapter
14
Baffle of fan
Protects the fan.
15
Switch handle
Controls the main circuit power.