Sourcetronic ST600 - Structure Diagram

Frequency Inverter ST600 Series High-Performance Multifunction VFD Product Overview
-15-
3.7 Structure diagram
The VFD layout is shown in the figures below.
Figure 3-8 Structure diagram of standard models (using a 030G3 VFD as an example)
7
10
6
9
11
1
2
3
4
12
8
13
5
No.
Name
Use
1
Upper cover
Used to protect internal components.
2
Keypad
For details, see "Keypad introduction".
3
Lower cover
Used to protect internal components.
4
Expansion card
Optional. For details, see "Expansion cards".
5
Control board baffle
Used to protect the control board and install expansion
cards.
6
Cooling fan
For details, see "Maintenance".
7
Keypad interface
Used to connect the keypad.
8
Nameplate
See "Product nameplate".
9
Control terminals
See "Installation guidelines".
10
Ventilation hole cover
Optional. Using the ventilation hole cover can enhance
the protection rating but also increase the internal
temperature, which requires derating.
11
Main circuit terminals
For details, see "Installation guidelines".
12
POWER indicator
Indicator of the power supply.
13
ST600 product series label
See "Product model".