Sourcetronic ST600 - P08-Enhanced Functions

Frequency Inverter ST600 Series High-Performance Multifunction VFD Function parameter list
-174-
P07.49
Running frequency
at 2nd-last fault
0.00Hz–P00.03
0.00Hz
●
P07.50
Ramp reference
frequency at 2nd-
last fault
0.00Hz–P00.03
0.00Hz
●
P07.51
Output voltage at
2nd-last fault
0–1200V
0V
●
P07.52
Output current at
2nd-last fault
0.0–6300.0A
0.0A
●
P07.53
Bus voltage at
2nd-last fault
0.0–2000.0V
0.0V
●
P07.54
Max. temperature
at 2nd-last fault
-20.0–120.0°C
0.0°C
●
P07.55
Input terminal
state at 2nd-last
fault
0x0000–0xFFFF
0x0000
●
P07.56
Output terminal
status at 2nd-last
fault
0x0000–0xFFFF
0x0000
●
P08––Enhanced functions
Function
code
Name
Description
Default
value
Modify
P08.00
Acceleration
time 2
See P00.11 and P00.12 for detailed definitions.
The frequency inverter ST600 series high-performance
multifunction VFD defines four groups of
acceleration/deceleration time, which can be selected by
multi-function digital input terminal (P05 group). The
acceleration/deceleration time of the VFD is the first
group by default.
Setting range: 0.0–3600.0s
Model-
dependent
○
P08.01
Deceleration
time 2
Model-
dependent
○
P08.02
Acceleration
time 3
Model-
dependent
○
P08.03
Deceleration
time 3
Model-
dependent
○
P08.04
Acceleration
time 4
Model-
dependent
○
P08.05
Deceleration
time 4
Model-
dependent
○
P08.06
Running
frequency of
jogging
This function code is used to define the reference
frequency of the VFD during jogging.
Setting range: 0.00Hz–P00.03 (max. output frequency)
5.00Hz
○
P08.07
Acceleration time
of jogging
Jogging acceleration time is the time needed for the VFD
to accelerate from 0Hz to max. output frequency
(P00.03).
Model-
dependent
○