Sourcetronic ST600 - Page 246

Frequency Inverter ST600 Series High-Performance Multifunction VFD Function parameter list
-239-
programmable card.
P27.22
Digital input
terminal status of
programmable
card
0x00–0x3F
Bit5–Bit0 indicates PS6–PS1 respectively.
0x00
●
P27.23
Digital output
terminal status of
programmable
card
0x0–0x3
Bit0 indicates PRO1, and Bit1 indicates PRO2.
0x0
●
P27.24
AI1 of the
programmable
card
0–10.00V/0.00–20.00mA
AI1 value from the PLC.
0
●
P27.25
AO1 of
programmable
card
0–10.00V/0.00–20.00mA
AO1 value from the programmable card.
0
●
P27.26
Length of data
sent by
programmable
card and PZD
communication
object
0x00–0x28
Ones place: Number of data sent by the programmable
card and the VFD (PLC card sent + VFD sent table 1 +
VFD sent table 2)
0: 0+24+60
1: 12+24+60
2: 24+24+60
3: 36+24+60
4: 48+24+60
5: 60+48+60
6: 72+24+60
7: 84+24+60
8: 96+96+96
Tens place: Card that communicates with the
programmable card via PZD (Only valid when the ones
place is set to 5)
0: DP
1: CANopen
2: PN
Note: P27.26 can be changed at any time, but the
change will only take effect after the re-power on.
0x03
○
P27.27
PLC card save
function at power
failure
0–1
0: Disable
1: Enable
1
◎