SpectraLink 8440 - Page 37

Spectralink 84-Series Series Wireless Telephones Administration Guide
1725-86984-000_P.docx
September 2016 37
Table 3-3: WPA2-Enterprise Menu
Name
Possible Values
Fast Roaming Method
0=Opportunistic Key Caching (OKC) , 1= Cisco
Centralized Key Management (CCKM)
The fast roaming method. These fast roaming methods allow for the part of the key derived from the server to be
cached in the wireless network, thereby, shortening the time to renegotiate a secure handoff.
EAP Method
1=EAP-TLS, 2=EAP-PEAPv0/MSCHAPv2 (default),
6=EAP-FAST
The Extensible Authentication Protocol (EAP).
User ID
String
The authentication user name.
Password
String
The authentication password.
PAC File Info
See PAC File Information.
EAP-FAST Inband Provisioning
Enabled, Disabled
A flag to determine whether or not EAP-FAST Inband Provisioning is enabled. Note: This parameter is unavailable
when EAP Method is 2.
Table 3-8: 802.1X Menu
Name
Possible Values
EAP Method
0 = None, 1=EAP-TLS, 2=EAP-PEAPv0/MSCHAPv2, 3=EAP-PEAPv0/GTC, 4=EAP-
TTLS/EAP-MSCHAPv2, 5=EAP-TTLS/EAP-GTC, 6=EAP-FAST, 7=EAP-MD5
The selected EAP type to be used for authentication. For more information, see Supporting 802.1X Authentication.
User ID
UTF-8 encoded string
The identity (or user name) required for 802.1X authentication.
Password
UTF-8 encoded string
The password required for 802.1X authentication. The minimum length is 6 characters.
PAC File Info
See PAC File Information.
EAP-FAST Inband
Provisioning
Enabled, Disabled
A flag to determine whether EAP-FAST Inband Provisioning is enabled. This parameter is used only if EAP
Method is EAP-FAST.
PAC File Information
You can modify Protected Access Credential (PAC) File Information from the PAC File
Information menu: