SpectraLink 8440 - Page 38

Spectralink 84-Series Series Wireless Telephones Administration Guide
1725-86984-000_P.docx
September 2016 38
Table 3-9: PAC File Information Menu
Name
Possible Values
Description
PAC File Password
UTF-8 encoded string
The password required to decrypt the PAC file.
PAC File Name
UTF-8 encoded string
The path or URL of the PAC file for download.
Remove PAC File
UTF-8 encoded string
A flag to determine whether or not to delete the PAC file from
the handset.
Radio Menu
You can modify the following parameters from the Radio menu:
Table 3-44: Radio Menu
Name
Possible Values
Regulatory Domain
0, 1, 2 or 10
Available values specify the regulatory domain. The supported values are 1 (North America), 2 (Europe) and 10
(Australia). If 0, no regulatory domain is selected. You must set the regulatory domain before the handsets can be
used. There is no default setting for this option and the handsets will not associate with an access point (AP) until
you specify a value.
5 GHz
See 5 GHz Menu.
2.4 GHz
See 2.4 GHz Menu.
5 GHz Menu
You can modify the following parameters from the 5 GHz menu:
Table 3-55: 5 GHz Menu
Name
Possible Values
5 GHz Enable
Enabled, Disabled
A flag to determine if the 5 GHz band is enabled.
Sub-bandx Enable
Enabled, Disabled
A flag to determine if the 5 GHz sub-band is enabled. There are four sub-bands (x=1 to 4).
Sub-bandx Transmit Power
1 to 7
The maximum power that the handset uses to transmit in the 5 GHz sub-band. The “7” setting is also called Auto
in some menus and is the maximum allowable power for that channel and data rate. If no maximum is set, the
handset uses the P5 settings for each channel activated. For more information, see the
device.wifi.radio.band5GHz.subBandx.txPower set of parameters in Appendix D.