Installation and Reference Manual
318
Installation and Reference Manual v3.2/0410/6
64 Domain Characters. The name of this phone.
128 Characters. Text description for this phone.
To provide Location Text Information for SNMP
The code to be used when accessing this IP Phone via Telnet. By default the code is 7388 but this can be
changed via this field.
The version of software running on this IP Phone.
Unspecified – setting for PCS 100, 560, 570 and 580
Mono 480 x 320
Colour 480 x 320
Colour 640 x 480 – setting for PCS 410/400
MAC address of this phone.
1-8 digit code. Used to secure ability to run a PCS 60 or PCS 50 as a partner on this port.
The number to be dialled by the system when the User assigned to this phone is working from home or
on a mobile and wishes to handle calls as though they were in the office.
Seconds. The number of seconds that the User’s home telephone will remain idle before a call from the
imiser system is cleared.
Enable/Disable. Allows the use of headset without the need to lift the receiver
For use with the PCS 580, 570, 560, 410, 400
Dim on Idle Not available. If selected this will be the same as selecting Bright Always.
Blank on Idle
The screen saver will appear after the handset has been idle for the
number of seconds indicated in the Screen Saver Params field.
Blank at Night Dim on Idle Not available. If selected this will be the same as selecting Blank at Night.
Blank at Night The Screen Saver will appear between the times entered in the Screen
Saver Params field
The screen saver will not be used.
To Next Page
Loading...
