Installation and Reference Manual
System Operation
Installation and Reference Manual v3.2/0410/6 33
View the configuration logged on as the new Administrator
20
Open Manager via your web browser.
21 In the User Name field enter the name of the new
Administrator and enter this Administrator’s password.
22 The Administrator logged in will only have access to the
sections of the database configured above.
Please note: as the default Administrator, Manager, gives Authorised Access to new Administrators it
recommended that Manager is not deleted.
Creating an Administrator for PCS 60 Operator Console Mode
When a User is using PCS 60 in Operator Console Mode the operator can also be given the ability to
change a User’s DND and Forwarding settings via their Favourites. To enable this facility the operator will
require an Administrator name and password.
1 Follow steps 1 to 7 above to create an new Administrator.
2 Select the Show Users option. This is the minimum option required for this facility to be available.
3 Follow steps 13 to 19 above to enter the Rights and
Access levels for this Administrator.
4 Within the PCS 60 application enter the Administrator
Name and Password in the PCS 60 Preferences
dialogue box.
For further information on please refer to the PCS 60 Operator Console Mode section on page 68 and to
the PCS 60 User Manual.
To Next Page
Loading...
