Do you have a question about the Spraying Systems AUTOJET 1750+ and is the answer not in the manual?
Brand | Spraying Systems |
---|---|
Model | AUTOJET 1750+ |
Category | Control Panel |
Language | English |
Crucial information and warnings regarding the system's operation and safety.
Guidance on how to effectively utilize the content of the owner's manual.
Essential safety instructions and precautions for system operation and maintenance.
Instructions for safely unpacking system components and checking for damage.
Overview of the primary features and capabilities of the AutoJet 1750+ spray control system.
Detailed technical specifications including dimensions, power, and I/O.
Details the physical connections and ports available on the control panel.
Instructions for connecting to the system remotely via Wi-Fi using a VNC viewer.
Explanation of the various buttons, icons, and navigation elements on the HMI screen.
Guide to operating the HMI and setting spray parameters for system operation.
How to use and activate pre-configured recipe settings for batch production.
Describes the elements and functionality of the main home screen interface.
Details the settings and procedures for the system's purge and clean cycles.
Overview of the settings screen for managing users, language, and system information.
Explains the activity log for tracking parameter changes and user actions.
Instructions for creating, editing, and managing user accounts and their permissions.
Details the different user groups, their rights, and default settings.
Guide to adjusting air pressure regulators and operating air supply to the system.
Configuration for nozzle type, atomizing air, and cycle speed settings.
Explanation of anticipator and follower time settings for spray pattern control.
Advanced settings for nozzle pulse time and offset correction.
Details on setting and understanding cycle speed for nozzle operation.
How to configure and manage recipes for different spray applications.
Explanation of spray timing modes like variable spray time, start/stop delay.
Configuration for delayed spray pulses with fixed durations.
How to set spray duration based on detected product length.
Configuration of duty cycle control using local or 4-20mA signals.
Settings for external trigger sources, minimum length, and frequency.
Setup and configuration for low level detection using a level sensor.
Overview of fault indicators, alarm history, and reset procedures.
Accessing preventative maintenance schedules and troubleshooting guides.
Screen displaying real-time readings for system troubleshooting and fault diagnosis.
Table of common faults, their causes, and recommended solutions.
Troubleshooting steps for HMI communication issues.
Details on cables for connecting electric spray nozzles like PulsaJet and AA250.
Information on the optional trigger cable for initiating spray sequences.
Specifications and assembly of the standard infrared photoelectric object sensor.
Features and specifications of the full-spectrum color sensor.
Details on the proximity sensor for detecting metallic objects.
Explanation of the secondary run trigger and level switch input.
Information about the heavy-duty foot switch for manual triggering.
Description of the hand trigger pendant with two switches for manual control.
Setup and specifications for the infrared thru-beam sensor.
Specifications for the short-distance laser sensor.
Specifications for the long-distance laser sensor.
How to wire the fault output signal to external devices like buzzers or PLCs.
Details on the splitter cable kit for fault output signals.
Information on extension cables for increasing reach of nozzle and trigger cables.
Setup for 4-20mA input signal to control PWM feature.
Wiring and activation of level sensors for tank level monitoring.
Summary of various trigger devices and their specifications.
List of available accessory kits for the spray control system.
Catalog of various cables for system connectivity and expansion.
List of accessory switches like pendants and foot switches.