Spraying Systems AUTOJET 1750+ - Application Settings; Spray Nozzle Settings

16
Applicaon sengs are related to your spray applicaon, and will allow you to customize the spray parameters to
achieve the desired spray coverage and ow rates. These sengs will also allow you to congure certain 1750+
accessories, such as the trigger interlock and remote duty cycle if they are included in your specic conguraon in
later chapters of the text. This Applicaon Sengs secon explains the Spray Nozzle Sengs, Conguraon, Duty
Cycle, Trigger, and Tank Level Sensor Sengs.
Note: Applicaon Sengs and Recipe Sengs are the same. Use recipe funcon to congure most sengs if the recipe
feature is included in your system conguraon.
7.1 SPRAY NOZZLE SETTINGS
The Nozzle Sengs page allows for the eding of the Nozzle type and Cycle Speed.
—Nozzle type: nozzle family selecon, atomizing air selecon, and ancipator/ follower me.
—Cycle speed: allows for the eding of the minimum and maximum cycles per minute.
SELECTING NOZZLE TYPE:
—Nozzle Family: Select the type of nozzle supplied with your system.
—Enable Atomizing Air if your system requires air atomizing.
—Advanced Nozzle Sengs allows for eding the PWM sengs.
SECTION 7
APPLICATION SETTINGS
Eding Nozzle Type
Nozzle Sengs Screen
Applicaon Sengs
Color Code: Main
Pin
#
Color Description
1 Brown PWM +
2 white Fault
3 Blue PWM -
4 Black N/A
Main Connecon Specicaons