Spraying Systems AUTOJET 1750+ User Manual

3
1.1 IMPORTANT
This AutoJet
®
Spray Control Panel and all components are produced, tested and checked at the factory. The system
can be dangerous if used incorrectly. Read this manual carefully and read all safety instrucons.
Operators must always follow the general safety instrucons in the working area and aim to prevent accidents.
The manufacturer reserves the right to make changes in standard construcon without prior nocaon.
Images and diagrams in this manual may not be exact representaons of your system conguraon.
1.2 HOW TO USE THIS MANUAL
This manual is intended to be a source of informaon for the operators and/or technicians who may be installing, in-
teracng with, or servicing/maintaining Spraying Systems Co.
®
systems and components.
This manual contains important safety warnings, installaon/operang instrucons, and troubleshoong/
maintenance informaon.
ICONS
WARNING: The user can be seriously injured, damage their health, and/or damage the system.
CAUTION: Product, process, or environment can be damaged or be in danger if the instrucons are
not followed correctly.
ATTENTION: Supplementary informaon for the user that draws aenon to possible problems.
2.1 GENERAL SAFETY INFORMATION
READ AND FOLLOW INSTRUCTIONS
All safety related and operang instrucons should be read before the system is operated. Follow all operang in-
strucons.
SERVICING
Do not aempt to service this system unless you have been trained or authorized to conduct repairs. Only authorized
and qualied service personnel should aempt to service this system. Service by unauthorized personnel will void any
warranes.
WARNING: Before performing any maintenance, make sure electrical power is o and that any air
and liquid pressure is bled from the system.
REPLACEMENT PARTS
This system has been designed with components that work together to provide the best system performance. When
replacement parts are required, only Spraying Systems Co.
®
recommended components should be used to maintain
proper system operaon, electrical and pneumac safety. The use of any unauthorized replacement parts will void
any warranes.
UNINTENDED USE
Use of Spraying Systems Co.
®
equipment in ways other than those described in the documentaon supplied with
the equipment may result in injury to persons or damage to property. Examples of unintended use of equipment:
SECTION 1
PREFACE
SECTION 2
SAFETY

Spraying Systems AUTOJET 1750+ Specifications

General

Brand	Spraying Systems
Model	AUTOJET 1750+
Category	Control Panel
Language	English