– Determine individual weights by reading the
nameplate of the industrial truck.
– The unit weights are added to give the total
actual weight of the industrial truck.
Net weight(1)
+ Max. permissible battery weight(2)
+ Ballast weight (variant)(3)
+ Net weight of attachment (variant)
+ 100kg allowance for driver
= Total actual weight
Attaching hoists and harnesses
A - Lifting point (drive side)
DANGER
There is a risk of fatal injury from being hit by the
industrial truck if the hoists and harnesses fail and
cause the truck to fall!
– Use only hoists and harnesses with sufficient load
capacity for the loading weight of the industrial
truck.
– Use only the industrial truck's designated lifting
points.
– Make sure that harness parts (hooks, shackles,
straps and similar items) are used only in the indi-
cated load direction.
– The harnesses must not be damaged by parts of
the industrial truck. Use suitable edge protection.
Requirements
●
The truck loaded on from vehicle.
●
Work platform is parked securely.
●
Tools and Material Required Lashing
straps.
– Park the industrial truck securely; refer to
the chapter entitled "Parking the multi func-
tion vehicle securely".
– Ensure that the key switch is switched off.
Operation
4
Transporting the truck
735091 801 1525EN-12/2022 - 06
To Next Page
Loading...